Is your “insulated” bearing just a piece of painted steel? This guide reveals the critical differences between cheap spray paint and real plasma ceramic, teaching you 4 simple methods to spot counterfeit insulated bearings before they destroy your equipment.
While shaft grounding rings provide a low-impedance path for common-mode currents, this guide explains why pairing them with electrically insulated bearings is necessary to fully prevent premature failure in VFD-driven motors.
This technical guide explains the physics behind electrical bearing damage, focusing on how bearing capacitance and impedance allow high-frequency VFD currents to couple across the lubricant film. It covers the mechanisms of EDM, fluting, and how to select the right mitigation strategies like insulated bearings.
This guide outlines the essential procedure for testing insulation resistance in electric bearings to verify protection against damaging shaft currents. It covers necessary equipment, step-by-step testing methods, and how to interpret results to ensure long-term motor reliability.
This practical guide explores essential bearing insulation technologies, including plasma-sprayed ceramic coatings, hybrid ceramic designs, and polymer barriers. It details how these systems prevent Electrical Discharge Machining (EDM) damage in VFD motors and helps engineers select the optimal solution for reliability.
This guide explains the origins of shaft voltage in VFD applications, the risks of electrical erosion, and practical strategies—including grounding and insulation—to protect motor bearings.
This guide outlines the critical steps for OEM engineers to correctly specify electrically insulated bearings during the design phase, ensuring long-term motor reliability in VFD and high-voltage applications by preventing electrical discharge damage.
This article explains the mechanism of VFD-induced shaft currents that damage pump and compressor bearings and details how electrically insulated bearings provide a robust solution to extend equipment life and reliability.
This guide explains the root causes of common-mode voltage in VFD applications, details its destructive impact on motor bearings and insulation, and provides actionable engineering solutions for OEMs and end-users.
This article explores how moisture, condensation, and chemical contaminants degrade the electrical protection of insulated bearings and provides actionable design and maintenance strategies to ensure reliability in harsh industrial locations.
This guide explains the critical role of electrically insulated bearings in preventing VFD-induced shaft currents, detailing their construction, benefits, and practical implementation strategies to maximize industrial motor reliability.
This engineering guide details the mechanism of VFD-induced shaft currents, explains the damage caused by electrical fluting, and outlines how ceramic-coated and hybrid insulated bearings provide the most effective protection for industrial motors.
This guide explains the technical importance of ceramic coating thickness, hardness, and dielectric strength in preventing electrical erosion. It offers insights into selecting the right insulated bearings for VFD motors and EVs to ensure long-term performance.
This guide explains the dangers of electrical erosion in inverter-driven motors and details actionable diagnostic and preventive measures to extend bearing life.
This guide explains the destructive impact of stray electrical currents on motor bearings and details how ceramic-coated bearings provide a robust, cost-effective insulation solution to prevent premature failure in modern drive systems.
This guide analyzes the science behind motor bearing overheating, identifying key triggers such as lubrication breakdown and misalignment, while providing actionable diagnostic and maintenance solutions to ensure long-term equipment reliability.
"*" indicates required fields
"*" indicates required fields
